Buying geared motors - project planning, calculations incl.

In addition to the geared motors, we also offer the configuration of your required drive (required torque, power, speed, etc.).
Thanks to our long-standing contact with SEW and other large geared motor manufacturers, we can also offer you low prices.
Get a non-binding offer now!
By the way, we also sell drives such as servomotors, standard motors and special motors.

Contact ATG Engineering!

Standard geared motors

Three-phase electric motors with the following gear types cover the largest range of all possible applications.

Stirnradgetriebemotor

Helical geared motors

From 0.09 kW to 200 kW or from 50 Nm to 19000 Nm.

Axis of the output shaft parallel to the motor rotary axis.

Parallel shaft helical geared motors

From 0.12 kW to 200 kW or from 130 Nm to 18000 Nm.

Axis of the output shaft parallel, but offset to the motor rotary axis.

Angular gearbox

Drive-in and drive-out shaft are perpendicular to each other.

Helical worm geared motors

From 0.09 kW to 30 kW or from 92 to 4200 Nm.

Axis of the output shaft perpendicular to the motor rotary axis.

Spiroplan geared motors

From 0.09 kW to 4 kW or from 25 to 180 Nm.

Axis of the output shaft perpendicular to the motor rotary axis.

Bevel geared motors

From 0.12 kW to 315 kW or from 200 Nm to 50000 Nm.

Axis of the output shaft perpendicular to the motor rotary axis.

Are you interested in geared motors and our services?

Since 1993 we have been there for our growing customer base. We would be pleased if we could also support you.

Please contact us or….

Variants

Apart from the fact that gearboxes and motors can be differently dimensioned/equipped, there are other important properties depending on the use of the geared motor. We are happy to advise you!

  • Room location / type of construction
    Please note: Depending on the position of the geared motor (installed / in three-dimensional space) a sufficient fill level with oil must be ensured. All teeth, rolling bearings, etc. must be immersed in oil by turns and completely lubricated.
  • The spatial position determines the design: foot, flange or in some cases even both.
  • Cooling
    While the gearbox is very heat-stable, sufficient cooling must be ensured for the engine.
    Normally, a geared motor cools itself. In exceptional cases, an external fan must be installed.
  • Position of terminal box / cable entry Connector position
    This point again concerns the nature of the place of operation. It goes without saying that you want good cable accessibility. The location of the terminal box on the motor and the cable entry should be planned well.
  • With & without brake
  • With & without tachometer encoder (for operation of the geared motor via frequency inverter)
  • With explosion-proof three-phase motors (ATEX) for use in potentially explosive atmospheres (EU Directive 94/9/EC (ATEX), or from 20.04.2016 of the EU Directive 2014/34/EU (ATEX)).
  • Temperature sensors
  • Aseptic geared motors
    • In some applications such as:
    • Food, luxury food and beverage industry
    • Chemical / Pharmaceutical industry
    • Dairy / Cheese dairy
    • etc.

Special hygiene regulations must be observed. Here, geared motor housings must be cleaned regularly and even treated with disinfectant. Therefore, they must be closed and the surface painted accordingly. In addition, Aseptic geared motors are larger in size because they do not require ventilation and the heat can only be dissipated via the larger surface area of the housing.

Special geared motors

We also sell geared motors for less common applications in industry and large-scale industries.

Stirnradgetriebemotor

Low backlash servo planetary gearboxes up to 3,000 Nm

Industrial gear units up to 600,000 Nm

Planetary gearboxes up to 1,400,000 Nm

Gearmotors Manufacturer

We always recommend drive technology from SEW. Due to our extensive product portfolio, we are also able to meet special customer requirements (other manufacturers). We can therefore also offer you gearboxes and geared motors from the following manufacturers:

SEW Eurodrive Logo

SEW Eurodrive

Getriebebau Nord Logo

Getriebebau Nord

Bonfiglioli

Siemens Logo

Siemens

Lenze Logo

Lenze

BEGE Power Transmission

ZAE Antriebssysteme Logo

ZAE AntriebsSysteme

Bauer Gear Motor Logo

Bauer Gear Motor